USB Device Tree Viewer 2.5.2.0 Portable [En]

 

Создавать темы 13-Июн-2015 00:47

-USB Device Tree Viewer 2.5.2.0 Portable [En]- Версия программы: 2.5.2.0
Язык интерфейса: Английский
Лечение: не требуется
Системные требования:
    Windows 2000 / XP / Vista / 7 / 8 / 8.1 (x86-x64)

Описание:
UsbTreeView маленькая утилита, реализующая большую, по сравнению со стандартным средством, наглядность представления USB портов, хабов и устройств, посредством древовидного списка и поля информации, с возможностью копирования текста простым выделением. UsbTreeView основан на образце USBView из комплекта драйверов Windows Server 2003, но дополнен: лучшими значками, возможностью обновлять устройства или список без сброса выбора, показом доп. информации от менеджера устройств, показом буквы диска монтирования и COM-портов, возможностью безопасного извлечения (Admin), выбором шрифта и цвета для правой панели, имеется панель инструментов и списки переходов для легкого поиска устройства в сложных деревьях. Из контекстного меню можно перезапустить девайс или порт, а так же безопасно извлечь устройство (эти действия требуют права администратора), или вызвать стандартный диалог свойств.

Особенности:

  • - обновление изменений выполняется асинхронно, выбранный элемент не сбрасывается
  • - показывает дополнительную информацию, полученную от Диспетчера устройств Windows, в том числе и по дочерним устройствам
  • - расширенная информация по интерфейсу USB доступна в Windows 8 (взято из последнего USBView)
  • - показывает букву диска, если есть, и COM-порты
  • - можно выполнить безопасное удаление устройства, рестарт и перезагрузку порта (админ)
  • - пользовательский шрифт и цвет для правой панели
  • - панель инструментов и списки переходов для легкого поиска устройства в сложных деревьях
  • - сохранение позиции окна
  • - улучшенные иконки в списке управления treeview

Дополнительно:

    Usage:
    UsbTreeView [/R:filename]
    /R:filename write (silently) a report to filename
    About Unknown Descriptors
    There are two reasons why decriptors cannot be decoded and therefore
    shown as "Unknown":
    - decoding is not implemented
    - the device's InterfaceClass is 0xFF (vendor specific), so class specific
    descriptors cannot be decoded since their class is unknown
    So, if you have an unknown descriptor and the interface class is not 0xFF
    then please let me know, maybe I find the right specification document
    and can add the decoding for it.
    For an unknown reason HID descriptors often cannot be read, Windows
    returns ERROR_GEN_FAILURE or ERROR_INVALID_PARAMETER. As far as I have
    seen it depends alone on the device but another user reported that
    some device's hid descriptor can be read under NT6 but not under NT5.
    About "Safe Removal" and "Restart"
    On Safe Removal UsbTreeView first calls the configuration management call
    CM_Query_And_Remove_SubTree. On success the device has the problem code
    21 which is CM_PROB_WILL_BE_REMOVED. A code 21 device can be reactivated
    by performing a DIF_PROPERTYCHANGE class installer call. This is what
    UsbTreeView does if you select "Restart device".
    But CM_Query_And_Remove_SubTree needs admin previleges, otherwise it fails
    with CR_ACCESS_DENIED. In this case CM_Request_Device_Eject is called
    which works without admin previleges but leads to problem code 47 which
    is CM_PROB_HELD_FOR_EJECT. Such a device cannot be reactivated alone.
    A reactivation is possible by restarting the port or the whole hub it is
    attached to. But the latter of course restarts all devices attached to
    the hub.
    In all cases UsbTreeView just performs the system call and shows a
    message-box if Windows returns an error. But Windows does not always
    return an error, even there was one, so sometimes nothing happens at all.
    About "Restart Port"
    This calls IOCTL_USB_HUB_CYCLE_PORT which simulates a disconnect and
    reconnect of the attached device.
    It is available under XP but usually only for hubs which run with the
    Microsoft default driver. 3rd party drivers usually return
    ERROR_UNKNOWN_FUNCTION.
    Under Vista and Windows 7 it is no more supported by the Windows standard
    drivers, it always fails with ERROR_NOT_SUPPORTED.
    Since Windows 8 it works again but in contrast to XP admin previleges
    are required. Without admin previleges it fails as under Vista and Win7
    with ERROR_NOT_SUPPORTED.
    About the Debug-Port
    In Microsoft's USBView sample there is a list of USB host controllers
    and their debug port. I've put the table into UsbTreeView, it shows
    then in the properties of the host controller a line like so:
    DebugPort (from List): 1
    Windows 8 has extended USB information, it reports for each port if it
    is debug capable and this works indeed (seen on a i945G Chipset with ICH7).
    USB Mouses
    If an USB mouse is moved while the tool requests its USB properties there
    is usually an error because the mouse just has more important things to
    do. UsbTreeView tries then for some seconds to get this information.
    You might see the yellow question mark at the mouse's tree node for a
    moment which disappears as soon as you stop moving the mouse.
    This retry mechanism is done for all type of devices but usually its a
    mouse where it helps.
    Information shown in the tree-view
    UsbTreeView is optimized for speed, therefore USB descriptors are not
    gathered before a device is selected in the tree-view. So, information
    which come from USB descriptors cannot be shown in the tree-view, it
    all comes from the Windows device manager.
    This is also why creating a full report takes a moment.

Что нового:

    New: Option to show the drive numbers in the tree, e.g. Disk3, CdRom1 etc. descriptor

О портативной версии:

    Предоставлена разработчиком, не требует установки.

Скриншоты:

Время раздачи: 24 / 7, до первых скачавших.
Яндекс.Метрика